HC-2000D- 650/700机械规格表
| 机械规格Speification | HC 2000D-650V/700V | HC- 2000D- 650S/700S | |
| 主轴 Main Spindle | 立铣回转速度Vetical spindle speed | 60~4000rpm无段变速 | 75~ 3600rpm 16段变速 |
| 端孔斜度Spindle taper | NT #40 | NT #40 | |
| 左右倾斜角度Swivel angle of head | 45° (L&R) | 45° (L&R) | |
| 伸出臂行程Overarm travel | 550mm | 550mm | |
| 升降套行程Quill travel | 140mm | 140mm | |
| 立铣主轴端至工作台面距离 Distance of vertical spindle to table | 190~580mm | 190~580mm | |
| 立铣主轴中心至机身距离 Distance of vertical spindle center to column surface | 140~ 750mm | 140~ 750mm | |
| 主轴自动押送速度Quill fed per revolution of spindle | 0.035/0.07/0.14mm(每转一圈) | 0.035/0.07/0. 14mm(每转-圈) | |
| 工作台 Table | 工作台尺寸(长x宽)Working table area (LxW) | 1250 x 290mm | 1250 x 290mm |
| 左右行程Longitudinal travel manua/auto | 650mm / 700mm | 650mm / 700mm | |
| 前后行程Cross travel | 350mm / 400mm | 350mm / 400mm | |
| 升降行程Vertical travel of knee | 380mm / 400mm | 380mm / 400mm | |
| T型槽(宽x槽数x间距)T-slots | 16x3 x 63.5mm | 16x 3 x 63.5mm | |
| 左右自动押送速度 Cutting federate (X) | 0 | 0 | |
| 左右快速押送速度 Rapid traverse (X) | 0 | 0 | |
| 升降快速押送Table elevating speed | 1150mm/ min | 1150mm/ min | |
| 电动机 Motor | 立铣主轴Vertical main spindle | 3.7kw (5HP)AC变频马达 | 3.7kw (5HP) |
| 升降座Table elevating | 0.75kw (1HP) | 0.75kw (1HP) | |
| 润滑泵浦Lubricating pump | 150w | 150w | |
| 电磁泵浦Electromagnetic pump | 40w | 40w | |
| 机械重量及包装 Machine Weight & Packing | 外观尺寸 Machine measurement (LxWxH) | 2100 x 2100 x 2500mm | 2100x 2100 x 2480mm |
| 装箱尺寸 Packing measurement (LxWxH) | 2270 x 1850x 2200mm | 2270 x 1850 x 2200mm | |
| 净重Net weigh | 1905kgs | 1881kgs | |
| 毛重Cross weight | 2055kgs | 2031kgs |
